89fiveeight

Summit dropped the ball on the Hays clutch that I wanted, so I'm thinking of going with the king cobra, but americanmuscle.com says its only rated for 315 hp. I've got a .030 Windsor with cast e7 heads, edelbrock air gap manifold, Holley 650 4bbl, and bbk shortys. Will I be pushing the envelope with that clutch?

mjr46

I 've run more hp on a kc clutch, it's all how you launch

89fiveeight

Will it stand up to 3k dumps or does it like feathering?

mjr46

I WAS DUMPING mine at 5k but that's mine, results may vary

89fiveeight

lol I dont think my stock drivetrain would stand up to too many 5k dumps

AMDanBailer

If you don't plan on going with a blower or Nitrous in the near future, the king cobra clutch will be fine. They can definitely hold a lot of power, it's definitely how you drive the car!

I think the clutch will be fine for some 3K launches, as long as you're launching properly. I ran a King Cobra clutch in my 1993 Foxbody with full bolt ons, heads, cam etc.. and it was fine for the length I had the car!

I hope this helps!

-Dan

89fiveeight

It does, thanks. How do I get my mustangforums.com discount?

AMDanBailer

Are you referring to the AmericanMuscle 6% discount code for Mustangforums users? If so, shoot me a PM and I'll gladly hook you up!

-Dan