90lxstang

im buying a new intake manifold for my 1990 lx 5.0 and i wanted to know if anyone had any opinions on whats better. i was lookin at either the ford racing cobra 5.0 kitr or an edelbrock performer intake. any suggestions are much appreciated.

91foxcoupe

my personal opinion is a Holley Systemax. I got that on my car with some afr165's and a f303 cam an put down 320 to the rear wheels. Plus that is what everyone at my mustang shop runs.

blown93gt

The edelbrock has been the most popular for many years because of the most horsepower and availability to get to the runners for modifications. I have had it on my car for 10yrs and am running over 500 horse power. I think it's your best bet.

[IMG]local://upfiles/23237/9D3BCB163D4E49C484E90200D30EEE61.jpg[/IMG]

[IMG]local://upfiles/23237/A15217AD0125457B8C85FDE92BAE0347.jpg[/IMG]

[IMG]local://upfiles/23237/7DE7FE22D0C24DF2946BABAECC8B6196.jpg[/IMG]

smokesricers

Ya edelbrock all the way thats what i use and it puts down the numbers

BADNOTCH

Edelbrock.

DR8907

Dont forget about the GT40 - it makes good power all the way through the RPM range.

OneFine89Mustang

trickflow is good

91stang

spyder intake... can do some serious damage with this...



http://www.adperformance.com/index.p...roducts_id=661

[IMG]local://upfiles/14448/B370B7A6BA344E6594066CD5E508F3F9.jpg[/IMG]

95whitecobra

Port your heads, put on either intake and a 65mm TB and you'll see a noticeable change.

88BlueGT

GO with an Edelbrock Performer RPM. They are great.