5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

91 5.0 mustang Clunking in rear end? Exhaust leak?

Thread Tools
 
Search this Thread
 
Old 08-13-2015, 08:11 PM
  #1  
91StangOwner
Thread Starter
 
91StangOwner's Avatar
 
Join Date: Nov 2014
Location: florida
Posts: 8
Default 91 5.0 mustang Clunking in rear end? Exhaust leak?

I need help trying to figure out what is causing the clunking noise in the rear end area and you feel it only when decelerating. The rear end also has 3:55 ring and pinion ratio so it has been upgraded and I know cause I counted and divided the two numbers when I changed the fluid. Also I don't really hear any whining noise from the rear end it's hard to tell if it would be whining cause exhaust is loud. What could it be?

Exhaust leak- so hooker headers and bbk x pipe. Now the right side header has an exhaust leak where the pipe and header meet so i tightened the two bolts (which needed some tightening) and it went away for a little but then came back and the exhaust leak is pretty loud too. Like i was able to tell it went away but then came back. I'm guessing the bolts are coming loose. what can I do about that?
91StangOwner is offline  
Old 08-13-2015, 10:55 PM
  #2  
raven_ghostwolf
3rd Gear Member
 
raven_ghostwolf's Avatar
 
Join Date: Apr 2007
Location: Eloy, AZ
Posts: 938
Default

New Nuts and Bolts and double nuts, stainless steel if you can. Or aircraft style self locking, not the nylon type. Or drill the nut and safety wire them. If the nuts coming loose is all it is.
raven_ghostwolf is offline  
Old 08-14-2015, 06:42 AM
  #3  
88 orangepeel notch
6th Gear Member
 
88 orangepeel notch's Avatar
 
Join Date: Mar 2010
Location: Wisconsin
Posts: 5,061
Default

And trying to explain a clunking noise over a forum is hard to to. Just one of those things where you have to be there to hear it. I'd start by getting under there and poke around. Looking for exhaust rubs, broken hangers, worn out bushings, etc.
88 orangepeel notch is offline  
Old 08-14-2015, 10:19 AM
  #4  
91StangOwner
Thread Starter
 
91StangOwner's Avatar
 
Join Date: Nov 2014
Location: florida
Posts: 8
Default Hey thank you guys for replying to this post

So Im heading to advance auto and lowes to go get bolts for the exhaust. I mights put a flange gasket too. I noticed some people have gaskets there in the exhaust while others dont. Second thing...I replaced all control arms and bushings on rear end. Then i also tried to move the driveshaft up and down but seems pretty good. Like theres no play in the u joints.
91StangOwner is offline  
Old 08-20-2015, 05:30 PM
  #5  
91StangOwner
Thread Starter
 
91StangOwner's Avatar
 
Join Date: Nov 2014
Location: florida
Posts: 8
Default

Wells guys i never got the new bolts because when i went to check it. They were good. They didnt loosen up. Now the exhaust leak isnt as loud as it was before but is still leaking at the flange area.
91StangOwner is offline  
Old 08-20-2015, 11:34 PM
  #6  
raven_ghostwolf
3rd Gear Member
 
raven_ghostwolf's Avatar
 
Join Date: Apr 2007
Location: Eloy, AZ
Posts: 938
Default

Originally Posted by 91StangOwner
Wells guys i never got the new bolts because when i went to check it. They were good. They didnt loosen up. Now the exhaust leak isnt as loud as it was before but is still leaking at the flange area.
Sounds like you need to get the flange gaskets after all. If your still hearing the banging sounds though back to what 88 orangepeel notch replied -

Originally Posted by 88 orangepeel notch
.... I'd start by getting under there and poke around. Looking for exhaust rubs, broken hangers, worn out bushings, etc.
raven_ghostwolf is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ding56
Classic Mustangs (Tech)
3
08-14-2015 02:40 AM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
PearlGenPu
V6 (1994-2004) Mustangs
6
08-12-2015 01:57 PM
11GTBlu
5.0L V8 Technical Discussions
2
08-10-2015 05:56 PM
Itstbrown
V6 (1994-2004) Mustangs
1
08-09-2015 03:49 AM



Quick Reply: 91 5.0 mustang Clunking in rear end? Exhaust leak?



All times are GMT -5. The time now is 05:55 AM.