Blew my rear end :(
09-23-2015, 11:02 AM
#31
1st Gear Member
Thread Starter
Join Date: Feb 2015
Location: MN
Posts: 96
Blew my rear end :(
Originally Posted by mjr46
irregardless......non or w/c it should have dextron iii/mercon.......flush out the gear oil and add dex3/merc
Got all the control arms out, what. A. Pain. I should be getting new spring isolators from LMR this week, seeing as i have all new hardware the reassembly should be a really quick job. Going to pick up some antiseize for my own sake if I ever want to remove them again.
09-30-2015, 04:46 PM
#32
1st Gear Member
Thread Starter
Join Date: Feb 2015
Location: MN
Posts: 96
So an update of sorts.
rearend bushing dont come with the UCA/LCA bushing kit :/ so ordered one of those...
I have a new theory, remember that electrical issue I had/have? I lose electrical power when pushing in clutch/going over bump.
New theory: I lose power to coil now, which causes a massive misfire on all cylinders, from what Ive read this might feel like what I felt, going to look over all connects, anyway to temporarily hardwire coil to ignition to test this theory?
rearend bushing dont come with the UCA/LCA bushing kit :/ so ordered one of those...
I have a new theory, remember that electrical issue I had/have? I lose electrical power when pushing in clutch/going over bump.
New theory: I lose power to coil now, which causes a massive misfire on all cylinders, from what Ive read this might feel like what I felt, going to look over all connects, anyway to temporarily hardwire coil to ignition to test this theory?
Thread
Thread Starter
Forum
Replies
Last Post
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM