Need a lil help with where i should go w my build - MustangForums.com


5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by:
Sponsored by:

Reply
 
 
 
Thread Tools Search this Thread
Old 07-15-2017, 07:17 AM   #1
Nmorgz
Thread Starter
 
Join Date: Jul 2017
Location: IL
Posts: 1
Default Need a lil help with where i should go w my build

As alot of you mothers and fathers..im waiting for Christmas...Tax time..iv did some basics to my 5.0 gt 95..gt 40 upper lower intakes (Explorer) msd pro billet distrib aluminum underpullys..edlebrock elbow off intake 75mm tb cold air induction stage 2 exceedy clutch..aluminum flywheel and 3.73 gear..i must say it woke it up i love hearing the air induction gulping air..my quandry i have stock heads cam internals..to be honest i dont even understand ratios rockers roller rockers ect..could some kind guru direct me to my next step for more performance i know i need heads if anyone had a simalur setup what is the best option for 4k or so..thanks
Nmorgz is offline   Reply With Quote
Old 07-16-2017, 06:14 PM   #2
TrimDrip
5th Gear Member
 
TrimDrip's Avatar
 
Join Date: Jan 2009
Location: AL
Posts: 2,760
Default

My car has a set of afr 165's and an eddy performer intake. I run a 90mm sct maf with 4 inch piping. It is pretty quick. With some 93 octane and about 36 degrees of timing, it will flat out hall.

It has a Vortech on it now but, it was quick before.
TrimDrip is online now   Reply With Quote
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 07:52 AM.