5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

What fuel pressure for Trick Flow Stage 1?

Thread Tools
 
Search this Thread
 
Old 08-29-2017, 02:56 PM
  #1  
schecterplayer
1st Gear Member
Thread Starter
 
schecterplayer's Avatar
 
Join Date: Jul 2012
Location: MD
Posts: 72
Default What fuel pressure for Trick Flow Stage 1?

hey everyone! Im quickly realizing why so many people dont use the BAMA tunes for their HCI swap cars. My car runs way too rich on the bama tune. So much so my eyes burn if im outside the car lol. So ive ditched the chip and am tuning the car myself with timing only right now. The car seems to run stronger on my tune vs the BAMA tune. I was told i should invest in an adjustable fuel pressure regulator. I was also told its not needed. Whats the truth? If i do need one, what should the procedure be to adjust the FP and what is optimum pressure for a HCI N/A car? Also will i need to install the 255 lph fuel pump i have? Right now the car runs great with just the timing at 14 advanced.
schecterplayer is offline  
Old 08-31-2017, 01:13 PM
  #2  
64bit
2nd Gear Member
 
64bit's Avatar
 
Join Date: Nov 2013
Location: RI
Posts: 254
Default

dont waste your money on an AFPR

youre still going to want to run 39psi, which is stock.
64bit is offline  




All times are GMT -5. The time now is 03:18 AM.