94 GT A/C vacuum line pictures..PLEASE!!!!
#11
Click the following link and Urambo's diagram will open.
https://mustangforums.com/forum/atta...se-vacuum2.jpg
https://mustangforums.com/forum/atta...se-vacuum2.jpg
Last edited by wbrockstar; 08-26-2018 at 12:11 AM.
#12
Huh. Not sure what's going on with the pics. They're working for me, but it's been so long since I was a new member that I don't remember the limitations or how must time or posts are required for full access.
I can even see them when logged out. Not just on their own, but I can also see them just fine through the "lightbox" that displays the image without leaving this page. So I don't understand why a new member would need special permission to view them. Doesn't make sense.
I can even see them when logged out. Not just on their own, but I can also see them just fine through the "lightbox" that displays the image without leaving this page. So I don't understand why a new member would need special permission to view them. Doesn't make sense.
Last edited by Urambo Tauro; 08-26-2018 at 01:18 PM.
#13
The following two pictures shows the vacuum hose that originates at the ac
port on the fender mounted vacuum tree.
The hose leaves the tree & heads towards the passenger firewall area where it meets/ connects to a white vacuum splice,shown
in pic 1 below.Another vacuum hose comes out of the passenger firewall,shown in pic
2 below,where it meets/connects to the same white vacuum splice,also shown in
pic 1.
port on the fender mounted vacuum tree.
The hose leaves the tree & heads towards the passenger firewall area where it meets/ connects to a white vacuum splice,shown
in pic 1 below.Another vacuum hose comes out of the passenger firewall,shown in pic
2 below,where it meets/connects to the same white vacuum splice,also shown in
pic 1.
Last edited by wbrockstar; 08-27-2018 at 03:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Alex 5.0 Mustang
5.0L (1979-1995) Mustang
3
06-03-2012 01:53 PM