Foxbody, explorer intake conversion
https://cimg4.ibsrv.net/gimg/mustang...6e184bfc4.jpeg
Okay so I recently bought an explorer intake, non egr, but I am having trouble with the setup of the hoses. As you can see There is a lot of tubing. Someone said that the two smaller tubes next to the hose that is put on goes to the coolant rack but I checked those two tubes and they are completely closed off, any help would be appreciated thanks! |
Red= goes to pcv valve
Blue= goes to S port on vacuum tree Green= goes to canister purge valve You can do one of the following 2 things to the pink and orange circled ports 1) Pink= get a splitter and turn the large port into two small ports and run them to the fuel pressure regulator & the evr solenoid 1) Orange= cap both ports *OR* 2) Pink= cap the large port 2)Orange= run one hose to the fuel pressure regulator & run one hose to the evr solenoid https://cimg7.ibsrv.net/gimg/mustang...e05ba2fd26.png |
All times are GMT -5. The time now is 12:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands