Foxbody, explorer intake conversion
#1
Foxbody, explorer intake conversion
Okay so I recently bought an explorer intake, non egr, but I am having trouble with the setup of the hoses. As you can see There is a lot of tubing. Someone said that the two smaller tubes next to the hose that is put on goes to the coolant rack but I checked those two tubes and they are completely closed off, any help would be appreciated thanks!
#2
Red= goes to pcv valve
Blue= goes to S port on vacuum tree
Green= goes to canister purge valve
You can do one of the following 2 things to the pink and orange circled ports
1) Pink= get a splitter and turn the large port into two small ports and run them to the fuel pressure regulator & the evr solenoid
1) Orange= cap both ports
*OR*
2) Pink= cap the large port
2)Orange= run one hose to the fuel pressure regulator & run one hose to the evr solenoid
Blue= goes to S port on vacuum tree
Green= goes to canister purge valve
You can do one of the following 2 things to the pink and orange circled ports
1) Pink= get a splitter and turn the large port into two small ports and run them to the fuel pressure regulator & the evr solenoid
1) Orange= cap both ports
*OR*
2) Pink= cap the large port
2)Orange= run one hose to the fuel pressure regulator & run one hose to the evr solenoid
Thread
Thread Starter
Forum
Replies
Last Post