HP numbers on a stock motor with an s/c

Reply Subscribe

Thread Tools

Search this Thread

01-07-2006, 10:01 PM

Tims 88GT

6th Gear Member

Thread Starter

Join Date: Jan 2005

Location:

Posts: 7,657

HP numbers on a stock motor with an s/c

Someone asked this question and i knew the answer but i was not certin on the numbers but here it is, All stock motor, makes 373.1hp and 510.9 ft lbs of twist at the rear wheels with an AOD @ 14psi. it runs 10.91 @17psi

Power adder
Vortec v-1 s trim
14psi at 5,600rpm

EXHAUST
bbk 1 5/8 shorties
bbk h-pipe o/r
flomaster 2 chamber mufflers with tail pipes

FUEL
walbro GSS 342lph in tank pump
42lb injectors
kirban afpr

TRANS
Stock AOD never opened
Precidion Industries 9.5 converter
with 4k stall

Rear Stock with 3.73

01-07-2006, 10:26 PM

hatingyou

2nd Gear Member

Join Date: Jun 2005

Location:

Posts: 196

RE: HP numbers on a stock motor with an s/c

You have a dyno graph? I just want to see the torque curve, that is a pretty beastly number for the stock motor.

01-07-2006, 10:28 PM

Suspect

2nd Gear Member

Join Date: Aug 2005

Location:

Posts: 361

RE: HP numbers on a stock motor with an s/c

torque # has to be off.

01-07-2006, 10:37 PM

marx91

3rd Gear Member

Join Date: Dec 2005

Location:

Posts: 926

RE: HP numbers on a stock motor with an s/c

the hp seems reasonable, that tq. # is a little high, that looks like a tq# from a nitrous hit not a blower

01-07-2006, 11:03 PM

Tims 88GT

6th Gear Member

Thread Starter

Join Date: Jan 2005

Location:

Posts: 7,657

RE: HP numbers on a stock motor with an s/c

look up Tim Stockwell that will show you the same thing. i thought the same thing, but i think they have a dyno graph, i only have the info in the December 2004 issue of 5.0 mustang and super fords. hope this helps, if it is true that is one heck of a tq number