cnh

try logging your shift points and rpm at the shift point to find your max output

cnh

what mods do you have now

cnh

anyone still here

cnh

you still there

bullypits01

Hey look adw18ng, with my old *** stock head, stock cam, 306 motor, with like a very high gear ran 13.90 @ Coastal Plains Raceway in NC. Surely to god your well into the 13s. Best advise is if you are looking to save time at the track put those suspension parts I listed on. You can have all the motor you want but if you can't put it to the pavement you're still not gonna go anywere any faster. Here's a story from a friend of mine(my best friend). I'm a Marine and while I was away this happened to him. He has 2 Camaros; one of which is a 97' with a 388, ported heads, ported intake, big injectors, and yata yata yata. He races this mustang with pretty much stock stuff except for a cam and suspension parts kinda like the ones I have. He claims the mustang beat him by about 6 cars.

JoHnNy sAvAgE

I dont think you have to worry about being able to break into 13's. w/those mods you surely will. Just concentrate on your launch and shifts and you'll be good!

91hatchgt

My car stock went 14.7 @ 92mph with only a Trick Flow intake on stock heads/cam etc. I added Exhaust 4.10's and a King Cobra Clutch and pulled a 14.2 @ 96mph.. With heads and a cam and rockers, injectors etc etc etc like you have, you should be WELL into the 13's... 13.4-13.6 I would say...

Hit the track, and let us know what you run.

88BlueGT

^^^ I 150% agree. I dont think you COULDNT be into the 13's. Your mods list is pretty deep and can pull some nice times.

adw18ng

OK now im REALLY exited to pick up my car. its supposed to be done today...im going to call them here in a couple..

88BlueGT

I would start working on your suspension. Lighten up the front end (tubular k member, a arms, coil over, etc.) and than start on the rear and also GET SOME SUBFRAMES! (best thing to do for a fox). Good luck!