sklingb1

What size is my stock throttle body in my 86 GT? Going to intake and heads off an explorer will it require new injectors? What size? No major mods. Just ones listed. How about a new cam? Is this a good idea at the same time? Which cam?

thanks

86HOGT

Stock TB on the 86 and only on the 86 is 58mm

fastfox86

Make sure you won't have valve clearance issues with those heads. 86's have flattop pistons with no valve reliefs and clearance is tight.

sklingb1

I am changing pistons when I rip apart the motor to fix this, thanks.

FullAuto

If you are that far into it, you might as well change cams also. 19lb injectors should still be fine.

sklingb1

What cam should I go with with those mods? And what size TB should I be looking for with the heads and intake off an explorer?