MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   5.0L (1979-1995) Mustang (https://mustangforums.com/forum/5-0l-1979-1995-mustang-14/)
-   -   solid or polyurithane motor mounts? (https://mustangforums.com/forum/5-0l-1979-1995-mustang/93720-solid-or-polyurithane-motor-mounts.html)

Drive85mustang50 02-05-2006 04:12 PM

solid or polyurithane motor mounts?
 
Is there a big difference bettween Solid and polyurithane motor mounts? what are to pro and cons of each one. thanks

luckythirteen13 02-05-2006 08:43 PM

RE: solid or polyurithane motor mounts?
 
solid will transfer power better, and of course be stronger. poly mounts will absorb some of the shock of a hard launch but will make the car more livable on the street if you have a lumpy cam. i have a torque link on my motor which is a solid rod that holds the engine down so it cant twist when you floor it and i dont notice any issues as far as vibration goes and its my DD....but i have the stock cam which has a smooth idle

ZachW04Stang 02-05-2006 08:47 PM

RE: solid or polyurithane motor mounts?
 
I have solid mounts and the vibration isn't really noticable. There is a little vibration just sitting but once you start going you won't notice a difference. You will also burn your tires off when you put solid ones on. It gets torque to the ground a heck of a lot better.

Tims 88GT 02-05-2006 08:54 PM

RE: solid or polyurithane motor mounts?
 
polyurithane are better for a dd i think, but solid are better for performance. Zach i sent you a pm

Tims 88GT 02-05-2006 09:00 PM

RE: solid or polyurithane motor mounts?
 
Drive85mustang50 how do you like your BFgoodrich drag radials? i was thinking about getting some.

90lxrider 02-06-2006 12:57 AM

RE: solid or polyurithane motor mounts?
 
i have the solid mounts in my DD and i dont mind it .....yea it will shake a little bit more but your not driving a lincoln i like the shake ...gives it the muscle car feel

md66948 02-06-2006 08:37 AM

RE: solid or polyurithane motor mounts?
 
Who has the best solid mount? I need to put new mounts in my 95 GT project.

Dane

eaturls1 02-06-2006 04:08 PM

RE: solid or polyurithane motor mounts?
 
i got mine from moroso and never had problem. been in for 2 yrs.

gspfunk 02-06-2006 05:40 PM

RE: solid or polyurithane motor mounts?
 
For a daily, I'd go w/ poly mounts, but I know people w/ solid that don't mind the harshness.

Tims 88GT 02-06-2006 08:34 PM

RE: solid or polyurithane motor mounts?
 
well it depends, like the cam in my car is a lil rough so i got the poly mounts because it would of killed me with the solid mounts, no we are not driving lincoln but it still needs to be nice to drive.


All times are GMT -5. The time now is 02:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands