4.10's or 3.73's?
#41
RE: 4.10's or 3.73's?
ORIGINAL: ZipnByU
Thanks alot guys, even though it was mostly split down the middle and some good points made, I will be going with some 4.10's, and also grabbing a T56 as well. Thanks again.
Thanks alot guys, even though it was mostly split down the middle and some good points made, I will be going with some 4.10's, and also grabbing a T56 as well. Thanks again.
#42
RE: 4.10's or 3.73's?
I used a calculator to calculate those... but with the 3.73's I know those are right, 2150 at 60 mph. 3.90s are pullin 2400rpm at 80mph, but that is w/ 94 gt... my 2800 is a little high. Somebody here said they were at 3000 rpms on the highway or something like that. Would you say around 2500 rpms or so w/ 4.10s at 65mph for a 95 gt? Still getting 3.73's, but curious.... I have 18 inch wheels also, if this makes a difference...
#43
RE: 4.10's or 3.73's?
i have a few questions, 1) i have a 94 gt aod and i wanna get 4.10's but sum guy told me taht these arnt good with lowprofile tires, didnt tell me y?? is this true 2)if i get a new spedo gear i think they are only like 15 bucks, will taht b ok and is it hard to install 3)ive been workin on cars for a while but woundlnt call myself ne thing close to a know it all, but could i install teh gears and such myself or do i need to take it to a shop?
thanks u very much, i apretiate your help a lott
thanks u very much, i apretiate your help a lott
#44
RE: 4.10's or 3.73's?
1) I dont know why you wouldnt be able to use 4.10's with low profile tires
2) I believe that with the new speedo gear you will still be off some but you will be close (dont quote me this stuff)
3) I wouldnt install the gears yourself. I do not have personal experience with them but I've heard that it can get very difficult w/ all the shimming etc. Its would prob be best for you to just take them to a shop the have them done for an est. $250.
2) I believe that with the new speedo gear you will still be off some but you will be close (dont quote me this stuff)
3) I wouldnt install the gears yourself. I do not have personal experience with them but I've heard that it can get very difficult w/ all the shimming etc. Its would prob be best for you to just take them to a shop the have them done for an est. $250.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM