philly3384

Someone give me best way to get everything cleaned out from there experience. The directiosn they give are decent but im sure everyone has better ways of doing it. i was gunna poor it slowly into the pcv valve grommet but if anyone else knows a better spot let me know.

primetime5.0

do it on the brake booster line, becasue the pcv is behind the upper intake and is hard to get too

stanglx2002

its even easier to just put it in the tb

Quik

i put it in the vaccum line off the T on the firewall

forewarning....it will smoke like a civ for like 20 minutes. and cops might just show up lol

Keith5.0

for best results this is what you do:

with engine running slowly pour 1/3 of the bottle through the brake booster line, then shut off the engine for 10 mins, after that start it up and go tearing around and go full throttle a lot to blow all the gunk out. then just pour the rest into your gas tank.

89chatofive0

What Is SeaFoam?

M1ke

can anyone take a picture of the brake booster line? in know i have a 4.6 but i figured there's a chance they might be the same and ive had no luck getting an answer from the 4.6 forum

cammedlx

4.6'S don't have a vacum booster there hydraulic so you will have to find a diff. source of a vacum line...

89chatofive0

Here is mine it is the last one on the right.

91lxstang

yea i would also like to know what this seafoam stuff is