what do you guys think of this intake?
02-22-2006, 02:27 PM
#1
2nd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 356
what do you guys think of this intake?
how well will these work on my GT, mods below? How hard would this be to change..never done before? How long would it take?
http://cgi.ebay.com/ebaymotors/86-93...40553322QQrdZ1
http://cgi.ebay.com/ebaymotors/86-93...40553322QQrdZ1
02-22-2006, 02:32 PM
#3
2nd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 356
RE: what do you guys think of these heads?
ORIGINAL: Black Snake
Those arent heads, thats an intake.
And yes its a very nice intake to have.
Those arent heads, thats an intake.
And yes its a very nice intake to have.
you say very nice, how much will this help me out?
02-22-2006, 02:43 PM
#7
5th Gear Member
Join Date: Apr 2005
Location:
Posts: 3,721
RE: what do you guys think of these heads?
I think a 70mm TB is too big for what you need. A 65mm would be better. With that Maf You might be seeing 20-25 HP, depending on how your car runs now.
I would just get the intake, TB, and Maf then take it for a tune and you can see numbers as high as 25hp
I would just get the intake, TB, and Maf then take it for a tune and you can see numbers as high as 25hp
02-22-2006, 02:56 PM
#9
6th Gear Member
Join Date: Feb 2006
Location:
Posts: 5,263
RE: what do you guys think of this intake?
The big deal on the cobra/gt-40 intake manifold is the lower manifold.
Supposed to have MUCH better flow distribution to each individual cylinder.
You wont see a huge gain till you get new cylinder heads
but it will make those new heads scream when you do replace them.
Supposed to have MUCH better flow distribution to each individual cylinder.
You wont see a huge gain till you get new cylinder heads
but it will make those new heads scream when you do replace them.
02-22-2006, 02:57 PM
#10
2nd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 356
RE: what do you guys think of these heads?
ORIGINAL: lookinforastang
20+hp
just get it with the bigger MAF
it comes with 65mm TB which is better than stock
20+hp
just get it with the bigger MAF
it comes with 65mm TB which is better than stock
is the 73mm MAF a good size for the 65mm TB?
with the tune...I know with my L i had to get it tuned for freakin everything! I have the A9L comp in my GT and was wondering if I could get away without tuning it yet with this set-up, I know i won't get as much gains but will it still run ok?
