Draglites & Street slicks baby
#1
Draglites & Street slicks baby
I just won a set of wheels and slicks for my car. Wooooooo. I can't wait to go to the track and see what this 347 will do.
http://cgi.ebay.com/ebaymotors/ws/eB...760&rd=1,1
I'm also working on a deal with a guy to buy a matching set of skinnies for the front of the car.
http://cgi.ebay.com/ebaymotors/ws/eB...760&rd=1,1
I'm also working on a deal with a guy to buy a matching set of skinnies for the front of the car.
#2
RE: Draglites & Street slicks baby
3.5" BS!!! those things are going to stick out about 2" on each side.
i run a 15x8" drag lite on my car but with a 5.5" BS.
i have a pair of 15x8" drag lites with slicks and a 4.5" bs and they stick out about an inch.
i run a 15x8" drag lite on my car but with a 5.5" BS.
i have a pair of 15x8" drag lites with slicks and a 4.5" bs and they stick out about an inch.
#3
RE: Draglites & Street slicks baby
I hope it doesn't stick out too much. I was kind of factoring in the fact that my car's rearend had been shortened by 3/4 inches on both axles. I think that should tuck them a little. Plus I have spacers that came with my axle studs.
Here's a link to my install.
https://mustangforums.com/m_3212427/tm.htm
Here's a link to my install.
https://mustangforums.com/m_3212427/tm.htm
#4
RE: Draglites & Street slicks baby
ORIGINAL: 1990mustanggt
I hope it doesn't stick out too much. I was kind of factoring in the fact that my car's rearend had been shortened by 3/4 inches on both axles. I think that should tuck them a little. Plus I have spacers that came with my axle studs.
I hope it doesn't stick out too much. I was kind of factoring in the fact that my car's rearend had been shortened by 3/4 inches on both axles. I think that should tuck them a little. Plus I have spacers that came with my axle studs.
#5
RE: Draglites & Street slicks baby
ORIGINAL: luckythirteen13
thats good the rear is narrowed. what would axle spacers do? spacers are made to push the wheel out
ORIGINAL: 1990mustanggt
I hope it doesn't stick out too much. I was kind of factoring in the fact that my car's rearend had been shortened by 3/4 inches on both axles. I think that should tuck them a little. Plus I have spacers that came with my axle studs.
I hope it doesn't stick out too much. I was kind of factoring in the fact that my car's rearend had been shortened by 3/4 inches on both axles. I think that should tuck them a little. Plus I have spacers that came with my axle studs.
#7
RE: Draglites & Street slicks baby
ORIGINAL: PRO50SC
Gonna stick out!!! 3.5 + 3/4 = 4.25. IMO i't's not gonna look good. Not tryin to bust your bubble, just stating the obvious. Hope it works out for ya though.
Gonna stick out!!! 3.5 + 3/4 = 4.25. IMO i't's not gonna look good. Not tryin to bust your bubble, just stating the obvious. Hope it works out for ya though.
#8
RE: Draglites & Street slicks baby
Well, if you don't like the way they look, you can put them back on e-bay. If it's one thing I have learned from belonging to forums, always ask before you buy. School of hard knocks is a *****!!! Been there, done that. I think we all have.
#9
RE: Draglites & Street slicks baby
I'll make it work somehow. Luckly this car is just a weekend warrior. It won't see much street duty. She's pretty much going to be a trailer/garage queen. But, thanks for the info PRO.