Quik

heres pics of the new stance. on front is 140LB D&D coilovers with 90/10 lakewoods, rear are LMM platinum springs with poly isolators and 50/50 lake woods

also recently buffed out the 20yr oxidized paint






car needs washed and waxed but you get the point[/align]

Quik

details on the car are. 174k on orginal motor. with a K&N panel filter, OR H pipe and flows dumped and 355s it ran a best of 13.38@101 back in nov. of 05. last week before the upgraded springs { had B springs before] it went 13.33@101 but this was bottoming out on the 6250 launch and having the right rear tire get caught in the wheel well. so to cure that issue i rolled the lips of hte fender. im hoping next week with cool weather to hit a high 12 on motor

also the difference between the two times were about 20* in weather

ZachW04Stang

Looks good. Whats that car running nowadays?

Quik

since i took possesion of it back in nov 05. i used it as a true daily beater. i never washed it, the paint oxidized once again. i drove it for 2 winters. jumped a few things. i needed shocks so thats when i decided to put my drag suspension parts off my hatch onto the Notch. recently i put my dry kit on the notch. im hoping to hit 11s in a week or so. once i get some good times im going to put my D&D tubular K member on it along with my manual rack. both of these coponents are from my drag hatch that i never finished.

im curious to see how far i can push a bone stock motor with good driving, suspension and then do the same thing with juice

stang8689

needs some new wheels next, even some pony's

90mustang5.8

looks good!!!

Quik

ponys arent wide enough and are too heavy. but yes would like to have some welds

justakid

what size m/t in the back?

you running et streets?

sexy ****ing stance, im not much of a notch guy but this one really stands out.

Quik

they are 26x10.50x16 et streets

and thanks, i was going to track today but had a blowout of one of the et streets yesterday

justakid

how's the suspension holding up?

sorry to hear bout the blowout, that sucks ***.

at least all the sus. is taken care off. all you need is some welds huh