can u help me pridict my horse power
07-18-2007, 11:40 PM
#1
1st Gear Member
Thread Starter
Join Date: Jan 2007
Posts: 63
can u help me pridict my horse power
I just bought alot of parts for my 89 hatch i need help predicting my horse power
bbk long tube headers
4series flowmaster
4.10 posi rear
full msd ignition- 6AL box blaster coil msd distributor
holley 4150 650 cfm double pumper race carb
edelbrock preformer air gap intake
canfield 192 heads that are ported polished and flow 283 at .600 lift
1.65 rollar rockers
f cam lift 512 duration 288
speed pro pistons
egeal rods
all new bearings and gaskest
my compression should be 9.5-1
thats most of it
if you could help me i would appreciate it thanks
bbk long tube headers
4series flowmaster
4.10 posi rear
full msd ignition- 6AL box blaster coil msd distributor
holley 4150 650 cfm double pumper race carb
edelbrock preformer air gap intake
canfield 192 heads that are ported polished and flow 283 at .600 lift
1.65 rollar rockers
f cam lift 512 duration 288
speed pro pistons
egeal rods
all new bearings and gaskest
my compression should be 9.5-1
thats most of it
if you could help me i would appreciate it thanks
07-19-2007, 01:01 AM
#7
6th Gear Member
Join Date: Jul 2006
Location: San Diego, CA
Posts: 6,882
RE: can u help me pridict my horse power
ORIGINAL: 5.0Sleeper
no way its high 3's. mine's just 300 and I got a good bit more done to mine.
no way its high 3's. mine's just 300 and I got a good bit more done to mine.
or what else do you have done?
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM
