best time ive ever ran at the track
#1
best time ive ever ran at the track
this is by no means the fastest time ive run but it is the best run ive had on my dial in and it was for the win in the finals. click on the link below and look under the street class results. i was very pleased that night with all the hard work i had put into my stang to get there. by the way im justin williamson[8D]
http://www.statecapitoldragway.com/d.../07/080307.htm
http://www.statecapitoldragway.com/d.../07/080307.htm
#3
RE: best time ive ever ran at the track
im prolly not gonna get any better than the 12.55 i ran last week. i would have to either spray or boost and im an all motor guy so that wont happen. for all motor 306 with h/c/iand forged pistons i would say ive done preety good. the 347 stroker im currently building should produce around 600 to 650 ponys all motor so im excited to see but wont be ready until x-mas time. ive got to do somemore suspension mods for this new motor also.
#5
RE: best time ive ever ran at the track
ORIGINAL: iceman89gt
im prolly not gonna get any better than the 12.55 i ran last week. i would have to either spray or boost and im an all motor guy so that wont happen. for all motor 306 with h/c/iand forged pistons i would say ive done preety good. the 347 stroker im currently building should produce around 600 to 650 ponys all motor so im excited to see but wont be ready until x-mas time. ive got to do somemore suspension mods for this new motor also.
im prolly not gonna get any better than the 12.55 i ran last week. i would have to either spray or boost and im an all motor guy so that wont happen. for all motor 306 with h/c/iand forged pistons i would say ive done preety good. the 347 stroker im currently building should produce around 600 to 650 ponys all motor so im excited to see but wont be ready until x-mas time. ive got to do somemore suspension mods for this new motor also.
#6
RE: best time ive ever ran at the track
ORIGINAL: primetime5.0
please do explain how you plan on making 600 horse NA on a 347
not that i dont see it but i too am curious about what your doing i heard that u were using a new boss block? what kind of heads and cam is that beast gonna have , i am about to build a 347 to i am shooting for 375-400 rwhp out of it holley intake,ported twisted wedges,comp cam 560's-580's lift,
ORIGINAL: iceman89gt
im prolly not gonna get any better than the 12.55 i ran last week. i would have to either spray or boost and im an all motor guy so that wont happen. for all motor 306 with h/c/iand forged pistons i would say ive done preety good. the 347 stroker im currently building should produce around 600 to 650 ponys all motor so im excited to see but wont be ready until x-mas time. ive got to do somemore suspension mods for this new motor also.
im prolly not gonna get any better than the 12.55 i ran last week. i would have to either spray or boost and im an all motor guy so that wont happen. for all motor 306 with h/c/iand forged pistons i would say ive done preety good. the 347 stroker im currently building should produce around 600 to 650 ponys all motor so im excited to see but wont be ready until x-mas time. ive got to do somemore suspension mods for this new motor also.
not that i dont see it but i too am curious about what your doing i heard that u were using a new boss block? what kind of heads and cam is that beast gonna have , i am about to build a 347 to i am shooting for 375-400 rwhp out of it holley intake,ported twisted wedges,comp cam 560's-580's lift,
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
jpplaw
4.6L V8 Technical Discussions
0
08-22-2015 09:29 PM