Non-5.0 question for the techs
#11
RE: Non-5.0 question for the techs
Slide hammer FTW! Took about 10 minutes with the correct tool. FYI to you guys that might run into this at work... Go ahead and plan on needing the slide hammer and a 3.5" inch deck screw to get down to the steel in the sensor.
Thanks for all the replies and ideas!
Thanks for all the replies and ideas!
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
3
10-02-2015 08:06 AM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
treesloth
New Member Area
4
09-28-2015 07:03 AM