do 94/95 cobras
09-27-2007, 06:21 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 194
do 94/95 cobras
have forged pistons stock or no
09-27-2007, 07:02 PM
3rd Gear Member
Join Date: Sep 2007
Location: Florida
Posts: 761
RE: do 94/95 cobras
Nope, same block and pistons as the GTs. Top end (H/C/I) is where the differences are.
09-27-2007, 07:57 PM
5th Gear Member
Join Date: Dec 2006
Location: louisiana
Posts: 2,763
RE: do 94/95 cobras
only a few of the foxes have forged.
09-27-2007, 08:00 PM
5th Gear Member
Join Date: Aug 2006
Location: Rotterdam, NY
Posts: 3,333
RE: do 94/95 cobras
Quote:
ORIGINAL: 94StinkinLincoln
only a few of the foxes have forged.
Actually most foxes do, atleast '85-'92, maybe even earlier years.
'93's have hypereutetics.
09-27-2007, 08:03 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 194
RE: do 94/95 cobras
Quote:
ORIGINAL: PJB
Quote:
ORIGINAL: 94StinkinLincoln
only a few of the foxes have forged.
Actually most foxes do, atleast '85-'92, maybe even earlier years.
'93's have hypereutetics.
that sucs how much horsepower can the hyperetuetics handle
09-27-2007, 08:07 PM
3rd Gear Member
Join Date: Dec 2006
Location: South Carolina
Posts: 776
RE: do 94/95 cobras
Hypers arent that bad... hell the LS1, LS6, and LS7 engines use hyper pistons and they produce excellent power. They just dont do well with high boost, or predetonation. You can run a 125-150 shot on them as long as the engine is tuned for it. Just make sure you dont run lean.
09-28-2007, 02:12 AM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 194
RE: do 94/95 cobras
do they have aluminium blocks like the later cobras or no
09-28-2007, 07:47 AM
6th Gear Member
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
RE: do 94/95 cobras
Quote:
ORIGINAL: ozz
do they have aluminium blocks like the later cobras or no
nope, iron.
09-28-2007, 10:26 AM
5th Gear Member
Join Date: Sep 2004
Location:
Posts: 3,145
RE: do 94/95 cobras
Quote:
ORIGINAL: ozz
do they have aluminium blocks like the later cobras or no
Aluminum enging blocks! [:@][:'(]
09-28-2007, 11:03 AM
2nd Gear Member
Thread Starter
Join Date: Jul 2007
Location:
Posts: 194
RE: do 94/95 cobras
last question
did they have roller rockers or no i kno it is a 1.7 rocker ratio