xnext

hey guys! I'm really mad with my 89 5.0 mustang its has like a lot of performance **** in it and i only did 221 hp and 272 of tq and did a a 14.5 a MPHon the 1/4 mile, i needHELP!!! what can i do to fix this???? my cars has bbk intake,shorty headers, crown Victoria injectors, 155lph fuel pump,polished and ported heads(the stocks one) a E FRPP cam shaft,and rollers,its bore to .30 and the compression i got was 180 psi,a2.50 cat back with some trush pipes, electric fan,bbk under drive pulleys,msd coil blaster, and spark cables. I DONT HAVE a fuel regulator, it stils has the stock trothel body and the gears i think are 2.73, and the timing is set at 12 degrees i think or 14 i dunno, but what can i do with all that stuff i was hopping for more hp and qt it has a 5 speed tranny by the way any advice is good!!! [align=right][/align]

primetime5.0

horsepower and torque mean nothing.

dimebag

um... english???

anyway, u dont really have dick for mods... and prolly have a ****ty short time... learn how to launch it, get a sticky tire... and what the **** injectors???

if you drive like you type... well, that would explain it.

mjr46

Get gears..at least 3.73's....my 92 with 3.45 gears and sticy tires runs 13.80's to 13.90's @98 mph
PS :READ THE RULES OF THE FORUM TOO: DOYOU UNDERSTAND THE term NO double posting!!!??????[&:]

Valcore

what was ur 60' time?

shawnk007

You dont really have any mods....

mighty90

When did you swap out your transmission from the AOD to the 5 speed?

PRO50SC

Buwahahahahahaha, right. pathetic!![&:]

nmerrill

Get some real heads and gears. Sticky tires and youll be happy

302f150

Yeah, the stock heads don't flow sh#t even ported. You wasted your time there, keep the cam, get new heads. Then some 3.73's, and what the hell is up with crown vic injectors?