any way around this? - MustangForums.com

5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

any way around this?

Reply

 
 
 
Old 12-12-2007, 04:57 PM
  #1  
bansheeyfz
1st Gear Member
Thread Starter
 
Join Date: Oct 2007
Location:
Posts: 125
Default any way around this?

i bought a inch tach but dont want to drill my dash. is there a adapter plate or any advice that would eliminate the problem.
Also i want water temp and oil pres guage as well for the pillar. ELectrical or mechanical.?
bansheeyfz is offline  
Reply With Quote
Old 12-12-2007, 05:55 PM
  #2  
stang8689
6th Gear Member
 
Join Date: Jan 2007
Location: Milford, Delaware
Posts: 5,464
Default RE: any way around this?

They make plates that go in the a/c vent
stang8689 is offline  
Reply With Quote
Old 12-12-2007, 06:07 PM
  #3  
splash21
2nd Gear Member
 
Join Date: Oct 2007
Location:
Posts: 341
Default RE: any way around this?

pressure i would go with mech and temp i would go with elec
splash21 is offline  
Reply With Quote
Old 12-12-2007, 08:16 PM
  #4  
bansheeyfz
1st Gear Member
Thread Starter
 
Join Date: Oct 2007
Location:
Posts: 125
Default RE: any way around this?

what about the tach im not trying to drill my dash with screws?
bansheeyfz is offline  
Reply With Quote
Old 12-12-2007, 10:48 PM
  #5  
Dave5point0
2nd Gear Member
 
Join Date: Oct 2007
Location: Ft. Lauderdale FL
Posts: 337
Default RE: any way around this?

Then don't
Dave5point0 is offline  
Reply With Quote
Old 12-13-2007, 01:08 PM
  #6  
greenstreak9205
4th Gear Member
 
Join Date: May 2006
Location: Waterford, WI
Posts: 1,485
Default RE: any way around this?

3m double side tape it then. or you can suction cup it to the windshield
greenstreak9205 is offline  
Reply With Quote
Reply
 
 
 

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory