Red95GT5.0

Ok so, I have a 95 GT and i want to make 300rwhp at least. I need ideas of how to achieve that, i want to go n/a. Currently my car is an auto, but i intend to convert to a 5 speed (lot of work to be done to my car) anyways i would like to hear your suggestions and see what you guys have done or think would be the best way to approach this. I have another project on the side so i dont really have money right now, but at least i can start saving. Anyways thanks for the input

OneFastEclipse

A nice set of heads with cam, intake, and bolt ons would get you there. Though the easiest way is a supercharger.

WhiteWindsor

You would be better off to peice h/c/i yourself. The reason i say this is because alot of folk's buy the ready made kit from TF and wind up being dissapointed with the hp numbers and the price.

mjr46

1.H/C/I
2.ALL supporting mods
3.A dyno tune a must/burn a chip

r.barn

stock bottom end
Canflied 192's with 54cc chambers for 9.5 compression
Custom cam with 6,500rpm shift point
RPM-II or TrackHeat intake
1 3/4 LT's

That should do it.

Red95GT5.0

Ok im going to sound stupid so please bear with me im still new to this forum. Ive never heard the term H/C/I used until i got hear could someone tell me what that means? and i hear stroker kits brought up alot espically the 347 one...what could i expect from that? Thank you for the previous input by the way. Any idea on how much it would cost to get those 300to the wheels? Once again thank you for your advise

r.barn

H/C/I = Head/Cam/Intake swap.

Stroker will do nothing with out doing proper H/C/I with it.

Figure $3,000 for proper H/C/I install, will need to upgrade fuel pump, injectors, MAF and tune
with it also.

Red95GT5.0

Got ya, man i feel dumb. thanksfor the info. So should i just do a H/C/I with a stroker or just the H/C/I? Also is tunning hard to do on my car? i hear the ecu is kinda stubburn when it comes to modding the car. Thanks again for the input!

OnyxCobra

with the right h/c/i on a 302 you can make over 300whp with supporting mods fairly easily