Rajun_Cajun

So i just bought a 1993 LX.

AFR 165's
E-303
Crane 1.6 Roller Rockers
Performer Intake
BBK 70mm TB
Edelbrock EGR Spacer
BBK Underdrives
Crane Fireball coil and ignition box
MSD 8mm wires
Flex Fan
Hedman Shorties
BBK Catted H-pipe
Flowmaster Force II Cat-Back.

Battle Boxes
Subframes
Lakewood 50/50's in rear
Lake LCA's
4.30 gears

Center Force Dual Friction 2 Clutch.

Had it dynoed at 280 on the nose. Peaked at 5200rpm.

In the mail....

MAC Ceramic LT's
MAC o/r H pipe.
Granatelli Mass Air.
MAC CAI.

Soon to come...

Polished Prof. Products Typhoon Intake
F-cam or 1.7 rockers
3.73's


I'll try and get picks up 2 morrow.


I already got a chance to take it to the track too. First time ever at a track.

I ran a best of 9.674 with a reaction of .561 in the 1/8th. The car has WAY too much gear, gonna go to 3.73's. 1st gear is useless, so I was taking off in 2nd.This was on BFG radial T/A's. Traction was horrible. I was still spinning halfway through 3rd. Should be mid to low 8's with slicks. I'll most likely be leaving at 5000 in first with slicks. We will see next week....

w8less

why not save the money from the f cam and new rockers and get a custom cam?

that is unless your going to sell the 1.6s to me for dirt cheap

stang8689

how much you pay for it

kweb288

WERE ARE THE PICTURES

92cobra

+1 for pictures and nice job putting down that kinda power, good luck with it.

bighungrymatt

I also would like to see pictures, how much did you pay?

Congrats!

Rajun_Cajun

I payed $3800. If I get the 1.7 rockers, the lift will go from .498 to about .532. I know the F-cam lift is .512. Does anyone know if the F-cam pulls to 6500? I am trying to get up pics, but my camera is broken. The car isnt much to look at. Its white with a blue front bumper and primer on the quarters.


[/align]