new motor is up and runnin finally. idle clip
02-16-2008, 09:21 PM
#1
5th Gear Member
Thread Starter
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
new motor is up and runnin finally. idle clip
well i must say thanks first to all that helped me in this build this is my first real aftermarket build with 90% new parts. so thanks and i know all of u want to hear it after seeing my threads lately. so here you go i hope it works
02-16-2008, 09:24 PM
#3
5th Gear Member
Thread Starter
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: new motor is up and runnin finally. idle clip
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i194.photobucket.com/player.s...rtidleclip.flv">
02-16-2008, 09:25 PM
#4
5th Gear Member
Thread Starter
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: new motor is up and runnin finally. idle clip
that was the short clip i was learning my girls camera here is a onger clip and a little walkaround . enjoy 
fiing computer is battling me this one should work
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i194.photobucket.com/player.s...lecliplong.flv"
fiing computer is battling me this one should work
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i194.photobucket.com/player.s...lecliplong.flv"
02-16-2008, 09:55 PM
#6
5th Gear Member
Thread Starter
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: new motor is up and runnin finally. idle clip
oh you missed my update on my other thread well i talked to a buddy and he had this other ford guru look at it he said that everything i set up was fine and he had same problem crank no start so he said he screwed around more and thought it might of been my old 177,000 stock dizzy playin games so he went outside and stole his dizzy out of his stock 5.o and put it in mine fired right up so then he found out that the h. effex in the dizzy was fu#@ed up as i used a arp shaft and had problems seating the dizzy all the way down so he just barely filed it down and put a new h. effex in and she runs now
how does she sound can everyone hear the clip?
how does she sound can everyone hear the clip?
02-16-2008, 10:06 PM
#7
4th Gear Member
Join Date: Mar 2006
Location: CA
Posts: 1,836
RE: new motor is up and runnin finally. idle clip
that sounds nice[sm=hail.gif][sm=hail.gif][sm=icon_cheers.gif]congrats!! what cam is in it again? also is it cold?because thatis a lotof white smoke coming out....
02-16-2008, 10:08 PM
#8
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: new motor is up and runnin finally. idle clip
rev dat biiiiiiiiiitch up!!!! like this!!!
http://s242.photobucket.com/albums/ff63/mjr46/?action=view¤t=mustangf-cam001.flv
and what's been done to your motor??
http://s242.photobucket.com/albums/ff63/mjr46/?action=view¤t=mustangf-cam001.flv
and what's been done to your motor??
02-16-2008, 10:29 PM
#10
5th Gear Member
Thread Starter
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
RE: new motor is up and runnin finally. idle clip
oh i will rev the bitch up that is the 3 time it has been started and yeah i know i pussed out on reviing it , it new and also got a vacumn leak i think somewhere plus this like whistling noise kinda coming from the intake? other than that she is runnin smooth idling at about 850-950 computer still doesnt know what to think but its idling pretty good fuel pressure is set at 41 with vac out, timing set at 12 with spout at so ?