5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Looking for Mustang Help In Kentucky!!

Thread Tools
 
Search this Thread
 
Old 06-22-2008, 11:01 PM
  #1  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default Looking for Mustang Help In Kentucky!!

I have a 86 gt with built motor that I need some help with and maybe just to meet some fellow mustang fans in my area. I live in lexington Ky and was wandering if anybody was on here from here or nearby. Or maybe a mustang club.
pitman86gt is offline  
Old 06-22-2008, 11:22 PM
  #2  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: Looking for Mustang Help In Kentucky!!

hey i am in owensboro here.

check out:
bowlinggreenmustangs.net
louisvillemustangs.net
kyhorsepower.com

also if you need yo have your car tuned check out http://speedydyno.com/

spedey's is ONE OF THE BEST

w8less is offline  
Old 06-22-2008, 11:25 PM
  #3  
Explosive
Moderator
 
Explosive's Avatar
 
Join Date: Sep 2007
Location: Michigan
Posts: 3,264
Default RE: Looking for Mustang Help In Kentucky!!

What seems to be wrong with your motor ?
Explosive is offline  
Old 06-23-2008, 12:04 AM
  #4  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default RE: Looking for Mustang Help In Kentucky!!

ORIGINAL: Jasperstang308

hey i am in owensboro here.

check out:
bowlinggreenmustangs.net
louisvillemustangs.net
kyhorsepower.com

also if you need yo have your car tuned check out http://speedydyno.com/

spedey's is ONE OF THE BEST

little to far to come help me. but thanks for the info and I will need it tuned later. Here is my setup. I have stock block bored to 306. Machine work was done to have it all balanced and i beleive its called center bore cylinders. I have 800 dollars in machine work to block. Im running all arp studs and bolts on motor. windage tray stock rods with probe dome top pistons around 11 to 1 i beleive. high volume oil pump hell everything was redone. Afr 165 aluminum heads with trick flow stage 2 cam. I cant rememember who the lifters were from, I beleive it was crane. they are the anti pump up kind. Edlebrock performer intake bigger tb and mass meter. 19lb injectors. That is basicly my setup. oh yea smog gone and a/c elimitaor.

The engine is bolted to tranny and cluch is working properly. I need to basicly put injectors in wire up and put upper intake, tb and all front accessories. I will have to put distributor in and re top dead center it which im not to sure how to do. I can do all the work, but would just like someone to come and help me along.
pitman86gt is offline  
Old 06-23-2008, 12:05 AM
  #5  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default RE: Looking for Mustang Help In Kentucky!!

oh and i was thinking of going to get it dyno tuned later at modular performance in ohio, but maybe speedy will be better what do you think.
pitman86gt is offline  
Old 06-23-2008, 12:12 AM
  #6  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: Looking for Mustang Help In Kentucky!!

i think you will need more injector for sure
w8less is offline  
Old 06-23-2008, 12:14 AM
  #7  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default RE: Looking for Mustang Help In Kentucky!!

i was told by several people 19lb would be fine. that is the blue ones right. I took orange ones out they are 16lb right.
pitman86gt is offline  
Old 06-23-2008, 12:25 AM
  #8  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: Looking for Mustang Help In Kentucky!!

no blue is 24#
primetime5.0 is offline  
Old 06-23-2008, 12:29 AM
  #9  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default RE: Looking for Mustang Help In Kentucky!!

it has been 2 years since this car was running. i could have swore they were blue. but i thought they were one step up from stock wich is 16
pitman86gt is offline  
Old 06-23-2008, 12:29 AM
  #10  
pitman86gt
2nd Gear Member
Thread Starter
 
pitman86gt's Avatar
 
Join Date: Sep 2005
Location:
Posts: 229
Default RE: Looking for Mustang Help In Kentucky!!

i called my buddy and he said i got the same size as him which was 24's
pitman86gt is offline  


Quick Reply: Looking for Mustang Help In Kentucky!!



All times are GMT -5. The time now is 01:36 AM.