1995mustang818

well i whent to a well known machine shop called eddings machine shop inc ...they arecharging me $280 to rebuild them. includes cleaning and all that stuff 3 angle valve job pressure test and i dont remeber wat else the guy said....adder told me to get them milled to about a 63-64cc chamber he told me he would charge me $100 bucks to measure the chamber and mill it down to wat ever i want...wat do you guys about the prices ??does it sound about right..i also told him that i wanted to put some springs in there he said spring are about $100 thanx for your help guys

mjr46

springs should be matched to the cam you have or will be installing

1995mustang818

oh ok well i want a cam inthere but not yet can i just upgrade the spring and slap the heads on with my stock cam

projectresto83

Of course you can. But the Gt40s already have a 64cc chambers if I remember right. If you do get them milled be sure to check your pushrod length for proper valvetrain geometry

uedlose

Prices areare about the same as my guy.

jtmustang

decent price if not just a little high....but oh well get er done and runnin.

mjr46

personally I'd wait and just do it all at once ftw!!!