Project:Teal Beast
#1
Project:Teal Beast
Started on putting hte new parts i have procurde over the past year for the motor.
Going to be installing BBK Ceramic shortie headers, BBK X pipe, GT40X heads, BBK ssi race series intake, and still debating on putting in the cam now or later when i do the bottom end with forged internals. Pics below are before pics
[IMG]local://upfiles/83660/CC58B148249C42468359451A2D97809C.jpg[/IMG]
[IMG]local://upfiles/83660/D07D0C2D12174AE8B855F8F8AA5B4A58.jpg[/IMG]
[IMG]local://upfiles/83660/65FD077769744129BD2429DAF19F1A08.jpg[/IMG]
Going to be installing BBK Ceramic shortie headers, BBK X pipe, GT40X heads, BBK ssi race series intake, and still debating on putting in the cam now or later when i do the bottom end with forged internals. Pics below are before pics
[IMG]local://upfiles/83660/CC58B148249C42468359451A2D97809C.jpg[/IMG]
[IMG]local://upfiles/83660/D07D0C2D12174AE8B855F8F8AA5B4A58.jpg[/IMG]
[IMG]local://upfiles/83660/65FD077769744129BD2429DAF19F1A08.jpg[/IMG]
#2
RE: Project:Teal Beast
And these 2 are the exhaust removed and the last one is where i left off tonight and will continue tommorrow.
[IMG]local://upfiles/83660/7F778BA1796F45E1AA71D18360DF5A55.jpg[/IMG]
[IMG]local://upfiles/83660/CF755E25C6BE4015B701F67BD3928197.jpg[/IMG]
[IMG]local://upfiles/83660/7F778BA1796F45E1AA71D18360DF5A55.jpg[/IMG]
[IMG]local://upfiles/83660/CF755E25C6BE4015B701F67BD3928197.jpg[/IMG]
#6
RE: Project:Teal Beast
Removed the airinjection tubing,headers and heads today and scraped the top of the block a little.
Any sugestions on cleaning off the top of the block? was gonna use a biscuit than was thinkin it may take off some metal and am considering using a wire wheel. Last pic I put on one of the new heads jsut to see how it looks....Ya I couldnt wait.
[IMG]local://upfiles/83660/6FA3E7EF83A949A19BCAFD353C6E191C.jpg[/IMG]
[IMG]local://upfiles/83660/40E3ACB94F3E4118AC58C55275C06AE5.jpg[/IMG]
[IMG]local://upfiles/83660/488E8312BB28451F961DC87516DAAA52.jpg[/IMG]
Any sugestions on cleaning off the top of the block? was gonna use a biscuit than was thinkin it may take off some metal and am considering using a wire wheel. Last pic I put on one of the new heads jsut to see how it looks....Ya I couldnt wait.
[IMG]local://upfiles/83660/6FA3E7EF83A949A19BCAFD353C6E191C.jpg[/IMG]
[IMG]local://upfiles/83660/40E3ACB94F3E4118AC58C55275C06AE5.jpg[/IMG]
[IMG]local://upfiles/83660/488E8312BB28451F961DC87516DAAA52.jpg[/IMG]
#8
RE: Project:Teal Beast
Ok I decided to change the cam out also.....question is should I look into replacing the timing chain while I'm at it or should it be good? motor has about 125000 Miles on it. the oil gallery and old heads looked like they were in good condition.
#9
RE: Project:Teal Beast
yes on the new timing chain.its cheap insurance. make sure to save some money for a tune after your done. with that many changes your gonna need it. those sn95 computers are pretty picky.
#10
RE: Project:Teal Beast
Any sugestions on what type?I'm lookin at:
http://store.summitracing.com/partde...iew=sku&Ns=
or
http://store.summitracing.com/partde...iew=sku&Ns=
http://store.summitracing.com/partde...iew=sku&Ns=
or
http://store.summitracing.com/partde...iew=sku&Ns=