Venomantidote95

Anyone know of any good software to install on a laptop inside the car and runitthat isnt both arms and both legs to get?

94StinkinLincoln

this isnt the fast and the furious (or slow and frivelous, i must say)LOL

tuning is well daunting. it takes hours and hours and reading and trial and error to get it right.
what are your mods?

Tweecer R/T or the Anderson PMS are 2 tuning devices used on 5.0's
i have a Tweecer, and its not all that great to have a laptop in the car at all times, kinda a pain.

Venomantidote95

well that isnt the answer i was looking for but good try! i want theaem setup but it is too high priced! looking for something along those lines i didnt ask how dififcult it is!
but thanks for the info

old setup 308 trickflow topend not the kit you buy now, peiced together a b4 the kits were available, new setup 350cu in victor jr heads and comp cams nitrousgrind, with a victor jr intake all efi, 42lbs injectors, still aode tranny! 3500 stall, pa vlv body! 3.55 gears

FivePointOhh

doesnt really sound like you need a personal tuner but to answer your question one of our older memebers(samseed) used tweecer and he was extremely pleased with his results but he also had forced induction, methanol and nitrous injection.

kweb288

go to www.andersonmotorsports.com and look at there offerings on PMS. I have hear great things about it, and talked to a guy who was running it on his car at a car show. He had a 347 with paxton 2000 and 100 wet shot. Said he was putting down close to 800 at the wheels and that the pms really made it livable on the street.

They also have articles on their website about using this systme on N/A, Nitrous, And supercharged engines

hope this helps

94StinkinLincoln

aem and fast are stand alones, you dont need that. the tweecer is an excellent system.

Venomantidote95

alright thanks fellows!

r.barn

You just have to get inventive on what PC you use.

$300 ebay Fujitsu table pc, plug'd into my AEM

Shelty

^^^^ neato