Fuel pump complete and running!
10-10-2008, 11:14 AM
#1
3rd Gear Member
Thread Starter
Join Date: Apr 2007
Location: illinois
Posts: 914
Fuel pump complete and running!
What a job! To do it right that is...Next..Coming this weekend
https://mustangforums.com/forum/atta...1&d=1223655145
https://mustangforums.com/forum/atta...1&d=1223655183
https://mustangforums.com/forum/atta...1&d=1223655247
https://mustangforums.com/forum/atta...1&d=1223655145
https://mustangforums.com/forum/atta...1&d=1223655183
https://mustangforums.com/forum/atta...1&d=1223655247
10-10-2008, 08:15 PM
#4
3rd Gear Member
Thread Starter
Join Date: Apr 2007
Location: illinois
Posts: 914
I'm stumped...I have all computer and harnesses out just for the EFI. I have on the drivers side just one plug with like 8 wires. I have to re think this procedure. The water pump hoses is another bear to tackle. Manifold, carb, fuel lines everything is almost complete. I have to run a wire from the MSD to the relay in the trunk?
Thread
Thread Starter
Forum
Replies
Last Post
Design1795
Motor Swap Section
1
01-24-2017 10:38 PM