5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

gonna hit the track again

Thread Tools
 
Search this Thread
 
Old 11-19-2008, 02:44 PM
  #1  
roostracing
3rd Gear Member
Thread Starter
 
roostracing's Avatar
 
Join Date: Jan 2007
Location: Texas
Posts: 523
Default gonna hit the track again

Hey guys...gonna hit the track tonight...i ran a 13.5 @ 98 mph on my last outing. I havent had time to go to the track since the last time...so i figure i'd go tonight...the only thing different on the car tonight is i welded up the torque boxes and have a little cooler weather. I am also gonna run a short belt tonight. Lets see if i can break that 13.5 barrier! Wish me luck!
roostracing is offline  
Old 11-19-2008, 03:15 PM
  #2  
saleenpride1986
2nd Gear Member
 
saleenpride1986's Avatar
 
Join Date: Aug 2008
Location: CHICO California
Posts: 455
Default

good luck!
saleenpride1986 is offline  
Old 11-19-2008, 04:53 PM
  #3  
roostracing
3rd Gear Member
Thread Starter
 
roostracing's Avatar
 
Join Date: Jan 2007
Location: Texas
Posts: 523
Default

thanks man...track opens at 7...got everything in the car ready to go...looks like its gonna be about 55 degrees out tonight...perfect! Wish i had free time to get some rear suspension on the car!
roostracing is offline  
Old 11-19-2008, 06:58 PM
  #4  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

good luck and post the results
mjr46 is offline  
Old 11-19-2008, 08:34 PM
  #5  
projectresto83
M.A.D. Motorsports
 
projectresto83's Avatar
 
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
Default

Good luck. I am hoping to go on the 28th to see what I run. Even with my pizza cutter tires.
projectresto83 is offline  
Old 11-19-2008, 10:41 PM
  #6  
roostracing
3rd Gear Member
Thread Starter
 
roostracing's Avatar
 
Join Date: Jan 2007
Location: Texas
Posts: 523
Default

just got home...only made 2 passes cause i was helping my buddy out in his 05 gt...well i did it...

1st pass:

1.792 60 ft
8.528 1/8th @ 79.937 mph
13.420 @ 100.505 mph

2nd pass:

1.683 60 ft
8.366 1/8th @ 80.361 mph
13.268 @ 100.255 mph

launching at 5k and a short belt...about 58 degrees....i said i could run a low 13 and i did!! I love this car...high 12's is just around the corner...some skinnies and rear suspension...i should be there!..if not, a k-member and its 12's for sure! Stock motor!

I do have a vid but cant upload it...my buddy will do that...time slips will be scanned first thing tomorrow...
roostracing is offline  
Old 11-20-2008, 01:34 AM
  #7  
jtmustang
5th Gear Member
 
jtmustang's Avatar
 
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
Default

damn dude you got a freak of a car there...congrats
jtmustang is offline  
Old 11-20-2008, 07:57 AM
  #8  
roostracing
3rd Gear Member
Thread Starter
 
roostracing's Avatar
 
Join Date: Jan 2007
Location: Texas
Posts: 523
Default

thanks man! It felt good. I was even selling the car for like 2 weeks cause i never have time to enjoy it! Its off the market now...so close to them 12's!

Heres the timeslips...

Also...i know, i know...the reaction times suck...wasnt there to react good...i just wanted to make sure that i launch correctly...
Attached Files
File Type: pdf
timeslip1.pdf (11.1 KB, 31 views)
File Type: pdf
timeslip2.pdf (11.7 KB, 12 views)

Last edited by roostracing; 11-20-2008 at 08:02 AM.
roostracing is offline  
Old 11-20-2008, 08:52 AM
  #9  
FivePointOhh
in limbo
 
FivePointOhh's Avatar
 
Join Date: Jan 2007
Location: Iowa
Posts: 7,300
Default

pretty sick time there, congrats. cant wait to see the videos. she still have a violent launch? i remember the last videos looked like your rear end wanted to jump off the car. get some rear suspension and you should have a way better launch! good luck on the 12's!!
FivePointOhh is offline  
Old 11-20-2008, 09:11 AM
  #10  
roostracing
3rd Gear Member
Thread Starter
 
roostracing's Avatar
 
Join Date: Jan 2007
Location: Texas
Posts: 523
Default

a little better...the torque boxes are welded up now and i set the front struts a little firmer...took off good...i think rear suspension and front skinnies will get me into the 12's...i was gonna stop there and go for some power mods but if i get into the 12's with the 2 mods mentioned above...i may hold off and keep on staying on the stock motor and do the k-member...i wanna see how far i can go on the stock uncracked motor...once i see that i'm not going any faster..than i'll add some power...cam, intake, heads, etc
roostracing is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
12-19-2023 01:12 PM
MustangForums Editor
S550 2015-2023 Mustang
1
09-30-2015 12:39 PM
CS2007
Florida Regional Chapter
0
09-29-2015 12:06 PM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM



Quick Reply: gonna hit the track again



All times are GMT -5. The time now is 05:01 PM.