320 RWHP N/A 302
12-11-2008, 11:53 AM
#1
Thread Starter
Join Date: Dec 2008
Location: FLORIDA
Posts: 30
320 RWHP N/A 302
I HAVE PLANS ON DOING A SET OF AFR 185 WITH UPGRADED SPRINGS, LIGHTLY PORTED, PORT MATCHING COBRA INTAKE, CUSTOM GRIND CAM, LONG TUBE/PROCHAMBER/FLOWS AND ALL THE OTHER BOLT ONS. I DO KNOW ON A STOCK 302 I WILL NEED TO NOTCH THE PISTONS, BUT I JUST WANT TO HEAR OTHER PEOPLES INPUT ON WHAT THEY THINK IT'LL MAKE. IVE SEEN SET UPS LIKE THAT ON LINE SAYING THEY MAKE 340 + BUT ALOT OF PEOPLE ARE BS. DOES 320 WITH A NICE TUNE SOUND REASONABLE?
12-11-2008, 01:07 PM
#6
if the heads get ported, and a better intake(rpm 2 or systemax) maybe some port work on that too, and a big cam, custom ofcourse but tell whoever makes it you want a nasty one. and 300 atleast, if not more. but this is only with a manual on a normal dyno, not a mustang dyno.
12-11-2008, 01:23 PM
#7
5th Gear Member
Join Date: Feb 2007
Location: St. Charles Il, and ISU
Posts: 3,736
i just remembered they did a stock short block in one of the magazines using a n-51hr cam from anderson, trickflow heads, and typhoon intake and made over 300hp, think it was 320hp, 347trq.... so i guess it is more then possible
12-11-2008, 01:34 PM
#8
5th Gear Member
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
^^^i actually think they made a little more than that.
but YOU WILL need to notch the pistons for the afr 185's on the stock block, and yes up the intake and seek out a custom cam if u want to take full advantage of your combo ...
but YOU WILL need to notch the pistons for the afr 185's on the stock block, and yes up the intake and seek out a custom cam if u want to take full advantage of your combo ...
12-11-2008, 02:08 PM
#9
Thread Starter
Join Date: Dec 2008
Location: FLORIDA
Posts: 30
I have a buddy who has a 94 gt, lightly PnP GT40xs, e cam, matching cobra intake and bolt ons and he laid down 292 rwhp and 407 on 125 shot. id imagine afr should outflow them, plus a matching cam and intake to go with it.