89mustangfive0

ok so im shootin for 450 to the wheel with this set-up do you think ill hit it or beat it?
302 bored .040 over to 308, edelbrock performer 5.0 heads ( ported multi angle valve job) 1.6 scorpion rockers, anderson b-31 cam, trickflow track heat intake, vortech s-trim about 12psi of boost, 60lb injectors,t-rex and 255 pump, 80mm mass air, methanol injection and a custom dyno tune. let me know what you thinkk

jtmustang

yes 450 to the wheels is there

89mustangfive0

ok, do you think i break 450? i mean my goal is 450 so anything over it is just extra...the motor has about 3000 miles on it since being freshened up with forged internals

jtmustang

u should be right there at 450 rwhp with what u mentioned maybe a few more with the meth and how good of a tune...but keep the tune on the fat side a little for safety...

89mustangfive0

oh yes the shop im taking it to is very good with tuning, gets awsome power out fo the car, but is always safe...

mjr46

it has the potential to reach your goal, just have it built then dyno'd

89mustangfive0

yea i have the s-trim, the cam, the intake so far i just need the injectors maf and pumps and of course the dyno tune...goal is to have done by april so far soo good

FivePointOhh

any pics?

Tberg725

Only the dyno will tell.

89mustangfive0

lol yea the dyno will tell, im still puttin all the parts together..currently i have the cam, intake will be here this week, sct chip,s-trim and intall kit...i hope to order injectors,maf and power pipe this week and next check mr freeze, trex pump and 255 pump.