What Year Is This 302 ?
#1
What Year Is This 302 ?
Alright, at school in autos another group of kids are rebuilding a 302, it doesn't need to run, they're just rebuilding it for experience.
Now they can't figure out what year it is, nor can my teacher.
Flat top pistons, tells me 86 ?
Roller lifters, tells me at least 86 ?
Now where it starts getting weird, it has a newer style 5.0 intake. It just says 5.0L EFI
But from what I could see the heads are old, not E6's, definitely not GT40P's or GT40's.
Now, on the rear or the block, top side, there are the 9 digits or however many on the block, aren't the last two numbers supposed to be the year ?
I think it's a 302 built from a bunch of mismatched parts to make one complete 302, because it's got some weird/messed up stuff.
Now they can't figure out what year it is, nor can my teacher.
Flat top pistons, tells me 86 ?
Roller lifters, tells me at least 86 ?
Now where it starts getting weird, it has a newer style 5.0 intake. It just says 5.0L EFI
But from what I could see the heads are old, not E6's, definitely not GT40P's or GT40's.
Now, on the rear or the block, top side, there are the 9 digits or however many on the block, aren't the last two numbers supposed to be the year ?
I think it's a 302 built from a bunch of mismatched parts to make one complete 302, because it's got some weird/messed up stuff.
#5
I want to say the back of the intake cover plate that says 5.0L EFI has some stuff stamped on back, like a list. 85 86 and 87, I believe some stuff was stamped across the 85 mark, but I didn't think used those intakes back then, not to mention EFI and roller lifters/motor.
#7
I know, but it saves times. It's funny actually, autos 2 and advanced share the same class but do different stuff. I'm in autos 2.
Advanced kids are just rebuilding motors, but my friend and I are about the best in there so he also had us rebuild a Chevy 350 that needs to run(it does, we've run it) and I'm going to be fabricating some flanges for the manifolds and bolting twin turbos onto it. Then I'll start stuffing it into an eagle talon. Gonna be a fast ****in car.
Advanced kids are just rebuilding motors, but my friend and I are about the best in there so he also had us rebuild a Chevy 350 that needs to run(it does, we've run it) and I'm going to be fabricating some flanges for the manifolds and bolting twin turbos onto it. Then I'll start stuffing it into an eagle talon. Gonna be a fast ****in car.
Thread
Thread Starter
Forum
Replies
Last Post
Galactic
Archive - Mustangs For Sale
10
04-29-2019 02:56 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM