Think i figured out the setup I want to do.

Reply Subscribe

Thread Tools

Search this Thread

01-13-2009, 11:18 AM

#11

cmkp0819

1st Gear Member

Thread Starter

Join Date: Jan 2009

Location: Ohio

Posts: 96

Quote:

Originally Posted by kweb288

dont cut your h pipe down! just sell it and buy a new one, that way you know it fits correctly and you dont ruin the other one!!!
I have ceramic also, and they tend to stay better looking longer.
for an intake, look at holley systemax II, or and edelbrock (not the victor junior though). Those are some good intakes

You know of a link for the new h-pipe I'd need?

01-13-2009, 12:18 PM

#12

kweb288

5th Gear Member

Join Date: Feb 2007

Location: St. Charles Il, and ISU

Posts: 3,736

http://store.summitracing.com/egnsea...921571&NeXID=5

depending on which headers, auto or manual, and if you want cats or not here is your list!

01-13-2009, 01:50 PM

#13

cmkp0819

1st Gear Member

Thread Starter

Join Date: Jan 2009

Location: Ohio

Posts: 96

Quote:

Originally Posted by kweb288

http://store.summitracing.com/egnsea...921571&NeXID=5

depending on which headers, auto or manual, and if you want cats or not here is your list!

Think this is the one I'm going to get. Thanks for the link!

http://store.summitracing.com/partde...5&autoview=sku

01-13-2009, 05:37 PM

#14

cmkp0819

1st Gear Member

Thread Starter

Join Date: Jan 2009

Location: Ohio

Posts: 96

If I end up getting the Trick Flow kit, will I have to use a 75MM throttle body? Or can I use a 70MM.

01-13-2009, 05:51 PM

#15

kweb288

5th Gear Member

Join Date: Feb 2007

Location: St. Charles Il, and ISU

Posts: 3,736

you can use that one, but every bit helps

01-13-2009, 10:31 PM

#16

ctgreddy

6th Gear Member

Join Date: May 2007

Location: Dearborn, MI

Posts: 6,277

if i were you i'd just spend the extra 200 ontop of your heads and get the tf highports over whichever ones come in that kit. then just keep your stock intake for now.