5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

well guess I was wrong

Thread Tools
 
Search this Thread
 
Old 03-08-2009, 09:22 PM
  #1  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Red face well guess I was wrong

the car is running rough. It's like it's not firing on all cyl. right now it's to the point where the stock motor has more power Idk what is wrong with it right now cause other than the blowed head gasket the car perfect b4.Can anybody help?
mustangsneverdie is offline  
Old 03-08-2009, 09:26 PM
  #2  
calfroper_06
4th Gear Member
 
calfroper_06's Avatar
 
Join Date: Jul 2008
Location: texas
Posts: 1,175
Default

have you ran the KOER test
calfroper_06 is offline  
Old 03-08-2009, 09:32 PM
  #3  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

yea and even tho the cel light is on it shows no code
mustangsneverdie is offline  
Old 03-08-2009, 09:35 PM
  #4  
Portmaster
5th Gear Member
 
Portmaster's Avatar
 
Join Date: Nov 2008
Location: SC
Posts: 2,401
Default

Check to make sure you got the plug wires back on in the right order
Portmaster is offline  
Old 03-08-2009, 09:36 PM
  #5  
calfroper_06
4th Gear Member
 
calfroper_06's Avatar
 
Join Date: Jul 2008
Location: texas
Posts: 1,175
Default

^^^^^^yeah that tooo, lol make sure your graounds are good also. Check your wires to your coil and etc.
calfroper_06 is offline  
Old 03-08-2009, 09:41 PM
  #6  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

yea I've done all of that I've been toying with it for a few hours and can't figure out what's wrong with it
mustangsneverdie is offline  
Old 03-08-2009, 09:56 PM
  #7  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

nevermind just went and checked the oil and amazingly it turned to milk so that means I have to take the heads back off once again and redo avery freaking thing.I wouldn't mind doin it,if it wasn't my dd

Last edited by mustangsneverdie; 03-08-2009 at 10:00 PM.
mustangsneverdie is offline  
Old 03-08-2009, 10:02 PM
  #8  
calfroper_06
4th Gear Member
 
calfroper_06's Avatar
 
Join Date: Jul 2008
Location: texas
Posts: 1,175
Default

did you flush all the oil and wather from the first time. I had a buddy that kept tryin to save hes oil by just draining the water, i was f-in idiot just change the oil, lol hope its a simple fix
calfroper_06 is offline  
Old 03-08-2009, 10:07 PM
  #9  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

there was no water in the oil when I started it today so I know its either that I didn't torque the heads enough or it blowed another gasket
mustangsneverdie is offline  
Old 03-08-2009, 11:07 PM
  #10  
mustangsneverdie
5th Gear Member
Thread Starter
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

I guess tues. I'll trailer my car to school and then take my motor out there and tear it apart to rebuild it
mustangsneverdie is offline  


Quick Reply: well guess I was wrong



All times are GMT -5. The time now is 10:13 AM.