mustang283

I have a 331 stroker 5.0 motor with stock e7 heads and x303 cam and racing pistons.


I just bought 180cc trick flow heads with new valves and seals and everything. I just want to put the heads on and keep the cam and explorer intake For Now.

Will I need to get pushrods and roller rockers to put them on? Or can i just put the right on.

Thank you in advance!

mustang283

looks like hes including pro comp 1.6 roller rockers and push rods.. is that good?

AdderMk2

you will still need to check your PR length before installing them. it IS important

mjr46

generally the trick flow heads use a longer push rod IIRC, A 6.700 ISH??? BUT YOU WILL NEED TO CHECK LENGTH, THERE is no just bolt the stuff on and go, geometry must be checked and preload set