Need Help! New motor, starter will not engauge
#1
Need Help! New motor, starter will not engauge
Hey guys. I always come here when I have big issues with the stang so I hope someone can help as they have in the past. Firstly, the car is a 94 mustang GT. I just put a 427W motor in that I have not started yet. I think that I have a lead on the problem so heres the questions I have.
1. Wth connects into this harness?
2. What is the big fuse with the clear top in this picture (top center)? Where does it connect? I'm asking because I tested it with the fuse out of the sockets and both sides are hot. All that I could see in the ford manual is 'Ignition Switch' which was the label for the 2 under it as well...thanks ford.
1. Wth connects into this harness?
2. What is the big fuse with the clear top in this picture (top center)? Where does it connect? I'm asking because I tested it with the fuse out of the sockets and both sides are hot. All that I could see in the ford manual is 'Ignition Switch' which was the label for the 2 under it as well...thanks ford.