306 hp estimate
#1
306 hp estimate
freshly built 306
-forged dome pistons(10.5:1 compression)
-windage tray, 7qt oil pan
-edelbrock performer rpm heads(2.02 / 1.60)
-trickflow trackheat intake
-comp cams xe274hr (.555"/.565")
-75mm accufab throttle body
-24 lbs inj / 73mm maf
-electric fan
-forged dome pistons(10.5:1 compression)
-windage tray, 7qt oil pan
-edelbrock performer rpm heads(2.02 / 1.60)
-trickflow trackheat intake
-comp cams xe274hr (.555"/.565")
-75mm accufab throttle body
-24 lbs inj / 73mm maf
-electric fan
Last edited by Iroc; 05-01-2010 at 06:25 AM. Reason: different intake
#2
#3
if those are the kbb 116 .200 dome pistons then I ran a simialar set up with afr 185 heads, but mine was carbed.....I ran 12.20's @112 so my guess is my you could of been somewhere between 300-325..............
Last edited by mjr46; 03-28-2014 at 06:49 AM.
#5
in all honesty most numbers don't mean squat.
the only 2 numbers worth anything are 60 foot, and 1/4 mile ET
the only 2 numbers worth anything are 60 foot, and 1/4 mile ET
#7
My notch
I have a 306 with a trick flow sage 3 cam afr185 heads 1.6 rockers c4 trans brake 3800 stall 410 and long tubes full exhaust victor jr Intake and proform race carb any estimates of what my car should run 1/4 mile?
Thread
Thread Starter
Forum
Replies
Last Post
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM