When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do the convertible 1/4 windows use these guide bushings? If so i just need one per window right? I know the convertible front windows just have the one bushing per door and it is a different one than this. http://www.latemodelrestoration.com/...-Guide-Bushing
pain in the ****!!!, i removed all the paneling and pulled the window out, but then again I was doing weatherstripping too, the bushing snaps in place on the part the glass is attached too
I was wondering the same. I need to open it up to see if I need to change the bushings or the window motor. I just don't see how to open up that door paneling....
I got the panels off I replaced the 3 bushings in the motors. I just need to know the easiest way to go about removing the guide rod? To replace the bushing on it.