Another "can you identify this" thread

Reply Subscribe

Thread Tools

Search this Thread

02-16-2011, 12:15 PM

#11

tonylittell

Thread Starter

Join Date: Sep 2005

Location: NC

Posts: 31

Quote:

Originally Posted by AdderMk2

You need to do what I told you to do, before.

bring one piston to BDC
put a straight edge across the bore
measure the depth of the piston

it should be 3.4" for a 347

Using a standard tape measure it looks like 3 2/16ths of an inch in the hole and the bore looks to be just under 4 1/4 inches using the same tape measure. best i could do today. that wasnt measuring in the dish. that was measuring on the higher portion of the piston

Last edited by tonylittell; 02-16-2011 at 12:19 PM.

02-16-2011, 05:36 PM

#12

projectresto83

M.A.D. Motorsports

Join Date: Jul 2006

Location: Indiana

Posts: 8,014

Easy way to tell if its a 347...does it have the stock balancer on the front? It shouldn't since most if not all are balanced at 28oz. Not the stoc 50oz