What do you guys think about these head gaskets?
#13
I'm running the 8548's right now. Like mjr said, the difference is tin vs stainless fire ring. Arguably the 8548 is "easier" on aluminum heads than the 9333, and the 9333 is preferred when power levels get higher from boost etc. That said, they're both easy on aluminum heads and both stand up to high hp boosted apps. Either is fine, so it comes down to price, with the 9333 being slightly preferred over the 8548.
Since you already have the 8548's I'd use those.
Since you already have the 8548's I'd use those.
#15
i use these....about $120 for a pair, and you need the grooves cut in the heads, but not the block
http://cgi.ebay.com/ebaymotors/Fel-P...item483f960640
http://cgi.ebay.com/ebaymotors/Fel-P...item483f960640
Thread
Thread Starter
Forum
Replies
Last Post
eastexsteve
3.7L V6 Technical Discussions
1
12-04-2015 05:41 AM
KEM Motorworks
5.0L (1979-1995) Mustang
20
08-14-2015 10:13 PM
Soldier GT
4.6L (1996-2004 Modular) Mustang
9
08-12-2015 03:46 PM