What gears in my 9 inch?
#1
What gears in my 9 inch?
Hey I just picked up a 9 inch in great shape for $100 complete with axles...anyway the ring gear has the numbers "4210" on it, any idea what gear ratio I have?
Also I saw no c clips, so how do you release the axle to remove it from the tube? Do you have to pull seal to do it? I wouldn't think a seal is holding an axle in!
Thanks guys
Also I saw no c clips, so how do you release the axle to remove it from the tube? Do you have to pull seal to do it? I wouldn't think a seal is holding an axle in!
Thanks guys
#5
9" Fords use a retainer thing on the end of the housing.
There will 4 bolts holding it on.
Undo those and the axle will come out.
Then you can remove the center section (pig).
Chances are that it either 3.00 or 3.50 ratio.
There will 4 bolts holding it on.
Undo those and the axle will come out.
Then you can remove the center section (pig).
Chances are that it either 3.00 or 3.50 ratio.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM