gear question
#2
Sounds like a high 2. Something or a 3.08. Easiest way to tell is take the cover off, count the teeth on the pinion, then count them on the ring gear and divide the pinion count into the ring gear count. You can also jack the car up in the air, spin the tire one full rotation and note how many times your driveshaft spins but it isn't as accurate, it will get you in the ballpark though
#7
i know my last car would run around 100-110mph in 4th (4.6L) with 3.55 gears and this one will do somewhere around 80-90mph in 4th also my speedo is like 8mph off at 55
Last edited by majohns; 04-21-2012 at 09:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM