Fuse panel/Flasher
#1
Fuse panel/Flasher
When I hit the turn signal in my car, they just light up and don't flash. Well it turns out there's no flasher. I bought a flasher and tried to put it in. Well, it doesn't stay in! There's nothing in the holes for the prongs to slide into. The red/white white/red wires are there, but nothing going to where the flasher plugs in.
However, my problem is I can't seem to get the fuse block out. Is it possible with out removing stuff? Took out the two screws holding it but I just can't seem to get it out and I don't want to force it too hard. Trying to get it out so I can figure out the wiring for the flasher. Any tips or pictures would be great on that.
However, my problem is I can't seem to get the fuse block out. Is it possible with out removing stuff? Took out the two screws holding it but I just can't seem to get it out and I don't want to force it too hard. Trying to get it out so I can figure out the wiring for the flasher. Any tips or pictures would be great on that.
#7
At glove box opening ..look to top left side about 3" above. Look 5" to left on HVAC case there is a flasher. It is for the turn signals. Fuse box flasher (hazard lights)is behind the box at top. Use a mirror to locate.
#9
Ok so my center console was already out from removing the carpet. I pulled my HVAC controls and I still can't see it.... I've looked for 30+ minutes with a mirror and flashlight looking up from under the passenger side and driver side and through the glove box opening and I can't find the damn thing. Can anyone get a picture of it or make up a picture of the location...? this thing is seriously making me feel mentally challenged lol