2.25 inch drop using coil springs pix
#1
2.25 inch drop using coil springs pix
This is the before and after results of my 2.25" drop using coil springs.
Im pretty happy with the new stance. Im hoping the back will settle a little more over the next couple hundred miles. This is a springs only drop , I didnt use andy cc plates or bumpsteer kit. I havnt noticed any bumpsteer at all and I was able to correct for a 2 degree camber change at the top of the strut tower. Springs were a cheap progrissive sport spring from Lotek . These things got rid of alot of body roll , and now when I jump on the gas coming out of a corner I get none of the usual snap steer , it is a drifting machine .[IMG][/IMG]
[IMG][/IMG]
Im pretty happy with the new stance. Im hoping the back will settle a little more over the next couple hundred miles. This is a springs only drop , I didnt use andy cc plates or bumpsteer kit. I havnt noticed any bumpsteer at all and I was able to correct for a 2 degree camber change at the top of the strut tower. Springs were a cheap progrissive sport spring from Lotek . These things got rid of alot of body roll , and now when I jump on the gas coming out of a corner I get none of the usual snap steer , it is a drifting machine .[IMG][/IMG]
[IMG][/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM