Planning H/C/I need advice
#1
Planning H/C/I need advice
Looking forward, would like to do Heads Cam Intake over the next few months I plan to start picking up parts. The car is street driven every-so-often just a weekend car. Just looking for some more power out of it. Its an 88 SD Car so I have to do a Mass Air swap looking at the fiveology Stage II Kit for 16 -24lb injectors. I know theres used ones out there, not sure how reliable they are.
Is a cobra intake upper/lower a good start or should I be looking at twisted wedge or elderbrock? If I go with Cobra should I just look for Gt 40 head & if so which cam? e303? What injectors would be best with this combo? Do I need new fuel rails if so which? Sorry just don't want to end up with stuff that really doesn't work well together.
Is a cobra intake upper/lower a good start or should I be looking at twisted wedge or elderbrock? If I go with Cobra should I just look for Gt 40 head & if so which cam? e303? What injectors would be best with this combo? Do I need new fuel rails if so which? Sorry just don't want to end up with stuff that really doesn't work well together.
Last edited by timmsram; 02-17-2013 at 04:15 PM.
#2
I went with the TW 170cc heads and trick flow upper and lower intake, comp cam and comp roller rockers with 24lb injectors to start. before i went and got it tuned the tuner told me to put in some 30lb injectors. with that i ran 295hp and like 300lbs. right now im at everything thats in my sig. i probably would have been fine with the 24lb injectors he just wanted to be sure we were going to run out of fuel. Im extremely happy where im at and i was happy with the 295hp but i wanted to hit that 400 mark.
i also still have those 24lb injectors for sale if your looking.
i also still have those 24lb injectors for sale if your looking.
#3
I went with the TW 170cc heads and trick flow upper and lower intake, comp cam and comp roller rockers with 24lb injectors to start. before i went and got it tuned the tuner told me to put in some 30lb injectors. with that i ran 295hp and like 300lbs. right now im at everything thats in my sig. i probably would have been fine with the 24lb injectors he just wanted to be sure we were going to run out of fuel. Im extremely happy where im at and i was happy with the 295hp but i wanted to hit that 400 mark.
i also still have those 24lb injectors for sale if your looking.
i also still have those 24lb injectors for sale if your looking.
Last edited by timmsram; 02-17-2013 at 04:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
folivier
Tennessee Regional Chapter
4
10-02-2015 05:32 AM