1982 5.0 AC and Power Steering Delete
#1
1982 5.0 AC and Power Steering Delete
Hey Everyone,
Brand new here, and hoping for someone who has gone through the same thing I have.
I have a '82 5.0 that the power steering and A/C have been deleted. Basically I need the brackets and pulleys to replace the missing components.
I have purchased a couple bullit pieces from Late Model Restoration, but I'm missing the actual brackets. Can anyone point me in the right direction to what I need exactly. Another big piece is the belt replacement to go with it, so if anyone knows what length I would need, would be much appreciated!
I have included a few pictures of the setup and the items I have purchased.
Brand new here, and hoping for someone who has gone through the same thing I have.
I have a '82 5.0 that the power steering and A/C have been deleted. Basically I need the brackets and pulleys to replace the missing components.
I have purchased a couple bullit pieces from Late Model Restoration, but I'm missing the actual brackets. Can anyone point me in the right direction to what I need exactly. Another big piece is the belt replacement to go with it, so if anyone knows what length I would need, would be much appreciated!
I have included a few pictures of the setup and the items I have purchased.
#3
Perhaps this helps, here's a "before" picture of my 82 GT engine. I also deleted the factory air when I put headers on it. Saved all the parts. I preferred having the T-tops off to AC.
Looks like you bought the same replacement pulley that I had.
Looks like you bought the same replacement pulley that I had.
#4
Ford made some weak/primitive tensioners in 82 didnt they??
#5
one of those may be a smog pump delete...Either way, all you need is the ac pulley on that side of the engine and a shorter belt. No need to wrap around two pulleys on the same side there
Last edited by TrimDrip; 12-07-2019 at 11:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post